7
Position the remaining (4) BKT SUPPORT VERT TOP HEADER TNX to the outer edges of the ROOF
TNX INNER as shown. Secure in place using (1)ea N6X1/2" S/TAP FLG PAS screw on the top side and (2)
ea M6X25 SKT BH PAS on the underside.
6
6
**224 N6X1/2" S/TAP FLG PAS (4)
[012-P03212-F]
**223 M6X25 SKT BH PAS (4)
[029-B00625]
8
Locate and remove the (4) M6 NUTS and WASHERS from both the BRKT SUPP HORIZ TOP HEADERS.
(4ea). Offer the BRKT SUPP HORIZ TOP HEADER into position and secure by relocating the fixings.
**209 M6 WSHR 20OD FLT BLK (4)
[068-652016]
**210 M6 NUT FLG SER PAS (4)
[050-F00600]
56
5
6
**74 BRKT SUPP HORIZ TOP HEADER (2)
[MI-0074XUK]
5
6
8
7
8
7