Sega MISSION IMPOSSIBLE ARCADE Owner's Service Manual page 106

9-2-4 CALIBRATION
From the GAME TEST MENU screen -
Using the SERVICE BUTTON to select CALIBRATION and press the TEST BUTTON to enter
The CALIBRATION TEST allows you to check and adjust the controller alignment on screen.
Use the SERVICE button to move the cursor to the desired item. Press the TEST button to confirm.
During CALIBRATION rotate the CONTROLLERS to all 4 corners of the screen.
1 SET "CALIBRATION START" and press test button
2 The target changes from the sight to the cross line.
3 Slowly move the control unit you wish to adjust to each of the device limitation. Do not rotate
controllers strongly too much.
The values will set automatically during rotating contollers in a few time.
4 Press the TEST Button and the calibration settings will be altered to reflect all changes made
before returning to the GAME TEST Mode screen. The cross line changes to the sight.
PLAYER1 CONTROLLER X
PLAYER1 CONTROLLER Y
PLAYER2 CONTROLLER X
PLAYER2 CONTROLLER Y
PLAYER1 CONTROLLER MIN X MAX X
PLAYER1 CONTROLLER MIN Y MAX Y
PLAYER2 CONTROLLER MIN X MAX X
PLAYER2 CONTROLLER MIN Y MAX Y
CALIBRATION START
DEFAULT SETTING
BACK
9 9
00
00
00
00
00
00
00
00
95