Safety Measures - Vitek VT-6408 Manual Instruction

WIRELESS WEATHER STATION VT-6408
The main unit of the wireless weather station
shows current time and ambient tempera-
ture. You can use the external wired sensor to
control the temperature outside.
DESCRIPTION
1. Main unit
2. Digital indications of the ambient
3. Digital indications of the wired
4. Data receipt indicator of the external sensor
5. Current time indicator
6. External sensor low battery symbol «
7. Temperature indications
8. External sensor temperature
9. Main unit low battery symbol «
10. Main unit temperature measurement
11. Current time setting/temperature view
12. Time setting/temperature measurement
13. Battery compartment lid
14. Base
External sensor
15. External sensor body
16. Display
17. Wired external temperature sensor
18. Battery compartment
19. Temperature measurement unit selection
20. Hanging place
21. Battery compartment lid
22. Base

SAFETY MEASURES

Before using the weather station, read this
instruction manual carefully and keep it for
future reference. Use the unit for its intended
purpose only, as specified in this manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/
her property.
M VT-6408.indd 3
temperature
temperature sensor
measurement symbol «°С/°F»
symbol «°С/°F»
button «MIN/MAX/+»
unit selection button «SET/°С/°F»
button «°C/°F»
•
The wireless weather station cannot be
used for medical purposes, for public
information or as a measuring instrument.
•
Do not install the external sensor in places
with the temperature below 0°С, it may
lead to shorter service life of the batter-
ies, shorter data transmission range and
display indication problems.
•
Install the external sensor in the room and
place the wired sensor outside.
•
Do not use the unit in places with high
temperature and relative humidity more
than 80%.
ATTENTION! Keep the unit dry. Do not
» immerse the unit into water or any other liquids.
•
Do not expose the unit to strong electro-
magnetic fields, strong vibration, avoid
dropping the unit - this may lead to mal-
» function of the unit or its failure.
•
Use only batteries of the type stated in the
instruction manual.
•
Do not use a new and an old battery at
the same time.
•
If you are not going to use the unit for a
long time, it is recommended to remove
the batteries from the main unit and the
external sensor.
•
Do not allow children to use the unit as
a toy.
•
This unit is not intended for usage by
children.
•
The unit is not intended for usage by
physically or mentally disabled persons
(including children) or by persons lack-
ing experience or knowledge if they are
not under supervision of a person who
is responsible for their safety or if they
are not instructed by this person on the
usage of the unit.
•
For children safety reasons do not leave
polyethylene bags used as a packaging
unattended.
ATTENTION! Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
•
Do not attempt to repair the unit. Do not
disassemble the unit by yourself, if any
3
ENGLISH
20.02.2018 9:26:21