Bean Hopper Funnel; Coffee Chute - Cafection Encore 29 Service & Installation Manual

SERVICE & INSTALLATION MANUAL - Encore 29
www.cafection.com
7.8.2

Bean Hopper Funnel

Frequency: monthly or every 1,000 cycles
1. Turn OFF the brewer. Open the brewer's door.
2. Pull down the bean hopper retaining pin.
3. At the same time, pull the bean hopper forward.
4. Unscrew the funnel bracket and remove it with the rubber funnel.
5. Unsnap the two parts (funnel bracket and rubber funnel). Clean and sanitize under hot
6. Order a large coffee to ensure that all parts and switches are working properly.
Beans will not fall when removing the hopper. However, this step is easier to
complete if the hopper is empty.
7.8.3

Coffee Chute

Frequency: monthly or every 1,000 cycles
1. Turn OFF the brewer. Open the door of the machine and remove the front panel.
2. Pull the coffee chute out from its socket.
3. Clean it thoroughly under hot water.
4. Air dry completely before reinstalling the parts.
5. Reinstall the front panel and close the door.
If the chute is not dry when reinstalled, coffee grounds may stick in the chute.
Bean rubber
funnel
Funnel
bracket screw
Funnel
bracket
Coffee chute
EN1805CMINSA Rev. 5 2021-10
800-561-6162
water. Air dry completely before reinstalling parts.
59