Erasing Tracks And A Whole Disc Contents (Erase); To Erase A Track - Sony Walkman MZ-N520 Operating Instructions Manual

Note
When you erase a track mark between the two
consecutive tracks that are assigned into
different groups, the second track is re-assigned
into the group containing the first track. In
addition, if you combine a track that is assigned
to a group with a track that is not assigned to a
group (two consecutive tracks), the second
track takes the same group assignment as the
first track.
Erasing tracks and a
whole disc contents
(Erase)
You can erase unnecessary tracks or all
tracks on a disc.
Notes
• You cannot erase tracks that have been
transferred from your computer. You cannot
erase an entire disc if it contains a transferred
track. In this case, transfer the track or tracks
to the computer.
• When you erase groups, see page 44.
4-way control key
(., >, x)

To erase a track

Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1
While playing the track you want to
erase, press MENU.
36
MENU
2
Press . or > repeatedly until
"EDIT" appears in the display, and
then press ENTER.
3
Press . or > repeatedly until
"Erase" appears in the display, and
then press ENTER.
4
Press . or > repeatedly until
"T : Ers" appears in the display, and
then press ENTER.
"Erase?" and "ENTER" appear
alternately in the display.
5
Press ENTER.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 34).
To return the preceding
settings
Press x.
To cancel erasing
Press x for 2 seconds or more.