On The Remote Control; Connecting To A Stereo System (Line Out) - Sony Walkman MZ-R900 Operating Instructions Manual

On the remote control

1
Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.
Display window on the remote control
C D
Indication C/D
Track number/Elapsed time
r
Track number/Track name
r
The number of tracks in the disc/
1)
Disc name
r
2)
—/Recorded time
1)
Appears only if the track has been labeled.
2)
Appears only when the clock is set.
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 29.
• The display that appears on the recorder is
different from the ones on the remote control.
See "On the recorder" (page 40) to check the
display that appears on the recorder.
DISPLAY
1)
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see "Optional accessories"
(page 69). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.
Portable DAT
recorder
to LINE IN
Stereo mini-plug
RK-
G136
to i/LINE OUT
Jog lever (L)
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the "AUDIO OUT" parameter for the
i/LINE OUT jack.
1
Press the jog lever (L), flip the lever
until "AUDIO OUT" flashes in the
display, and then press the lever
again.
2
Flip the jog lever (L) until "LINE
OUT" flashes in the display, and then
press the lever.
Stereo system,
etc.
2 phono plugs
L
R
(white)
(red)
RK-
G129
41