Changing Playback Speed (Digital Pitch Control); Setting The Alarm (Melody Timer) - Sony Walkman MZ-N910 Operating Instructions Manual

Changing playback
speed (Digital Pitch
Control)
The speed control function is useful for
language study and other purpose. This
function changes the playback speed
without changing the playback pitch.
The playback speed can be varied from
+100% to –50% the normal speed, in 13
steps.
Jog lever
(., >, ENT)
1
While playing, press DISPLAY for 2
seconds or more.
2
Slide the jog lever repeatedly until
"USEFUL" appears in the display,
and then press the jog lever.
3
Slide the jog lever repeatedly until
"DPC" appears in the display, and
then press the jog lever.
The player changes to speed-setting
mode. Select the speed while
listening the sound.
4
Slide the jog lever repeatedly to select
the desired playback speed, and then
press the jog lever to enter the
selection.
"DPC" appears in the display.
To cancel the procedure
Press x for 2 seconds or more.
36
DISPLAY
To return to the preceding
setting
Press x.
z
Once you open the lid, the playback speed
reverts to the normal speed (0%).
Note
When using digital pitch control, you may hear
noise or an echo in the playback.
For the recorder operation, see
page 63.
Setting the alarm
(Melody Timer)
The alarm is convenient way to remind
yourself of important times, such as when
to get off the train. The alarm can be set to
go off in 1 to 99 minutes. The alarm will
also go off while the recorder is stopped.
Jog lever
(., >, ENT)
1
Press DISPLAY for 2 seconds or
more.
2
Slide the jog lever repeatedly until
"USEFUL" appears in the display,
and then press the jog lever.
3
Slide the jog lever repeatedly until
"M-TIMER" appears in the display,
and then press the jog lever.
DISPLAY