Table of Contents
Advertisement
Menu Item
*4
Yes*, Print Cut Line, No
Auto Cut
Interface Setup
IP Setting
IP Address
Subnet Mask
Default G/W
10, 30 sec.; 1, 2, 5, 10, 30,
EOP Timer
60 min.*
System Setup
Cutter
Enable*, Disable
Buzzer
On*, Off
Sleep Timer
off, 5, 10, 20*, 30, 40, 50, 60 min.
Replace P.head
No*, Yes
Adjust Printer
Auto Print
On*, Off
Adj. Setting A1 ~ A5
Adj. Setting B1 ~ B5
Print Pattern A
Adj. Setting C1 ~ C5
Adj. Setting D2 ~ D5
Adj. Setting E2 ~ E5
Available Settings
Function
Selects automatic cutting when
printing with roll media. If you select
"Print Cut Line", a line prints to guide
manual cutting.
Allows you to set the network
information for a TCP/IP network
interface. After making each TCP/IP
settings, be sure to execute "Regis.
Settings" to enable the settings.
Sets the job timeout setting for the
printer.
Switches the roll media cutter on and
off.
Switches the buzzer function off and
on. When the buzzer is on, it buzzes
when an error occurs.
Sets the time interval for the printer to
remain idle before it enters the sleep
mode. If set off, the printer never
enters the sleep mode.
Sets the printer in the replace printhead
mode.
Automatically prints Print Pattern A
after replacing the printhead.
Allows you to adjust the alignment of
the printhead to correct color and the
direction of printing. Print Patterns A1
to E5 for each step of adjustment.
Menu Settings Summary Tables
5-11
Advertisement
Table of Contents
