Checking The Print Status - Canon W8200 User Manual

Checking the Print Status

If your printouts become faint or streaked with white lines, print a nozzle
check pattern to determine if the print nozzles on the printhead are clogged.
Before executing the nozzle check pattern, be sure at least one cut sheet or
roll media A3 size or larger is loaded.
Note
z If you are using a cut sheet, make sure at least one sheet of unused A3 paper (not
the blank side of used paper) or larger is set.
1
If the printer is off, press the Power button to switch it on.
After a few seconds "Online" is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button twice to display "MAIN MENU".
3
Press
M A I N M E N U
Paper Source
Roll Media
Cut Sheet
Cancel
Paper Source
Roll Media
Cut Sheet
Cancel
or to display "Test Print" then press
T e s t P r i n t
Data Message
Power
nter Online
Data Message
Power
Enter
Online
.
Checking the Print Status
7-31