Canon W8200 User Manual page 9

Canon large format printer w8200 user's guide
Hide thumbs Also See for W8200:
Table of Contents

Advertisement

TIn an Emergency ...
z To avoid a fire or serious electrical shock, if the printer emits smoke or a
strange odor, immediately press the Power button to switch the printer off
and unplug the power cord from the power supply. Discontinue using the
printer and call for service.
TCleaning the Printer
z Use only a damp, clean cloth to clean the surfaces of the printer. The
electrical contacts inside the printer become hot during normal operation.
To avoid a fire or serious electrical shock, never use alcohol, benzene,
thinner, or any other type of flammable liquid cleaner to clean the printer.
TPacemakers
z This printer generates a low magnetic field. If anyone wearing a pacemaker
experiences discomfort while working around the printer should leave the
area. Consult a physician before continuing to work around the printer.
Caution
TPrinter location
z To avoid damage to the printer or possible personal injury, place the printer
on a flat, stable surface that is safe from sudden shocks or strong vibrations
to ensure that it will not fall.
z To avoid damage to the printer which could result in a fire or electrical
shock, place the printer in a location where it is not exposed dust, direct
sunlight, high temperature, or high humidity. Use the printer location in an
environment where temperature and humidity are within the ranges of
o
5
C~35
z To avoid anything entering the printer and causing a fire, never place the
printer on a heavy wool or shag carpet.
z To avoid the hazard of a dangerous fire, keep the area around the power
supply where the printer power cord is connected so you can disconnect it
immediately if the printer starts operating abnormally (emitting smoke or
odd noises, etc.).
Locate the printer as close as possible to the power supply and make sure
the power supply is easily accessible.
z To ensure normal operation of the printer and avoid possible damage,
never install the printer near large office equipment or any other type of
electrical device that emits a strong magnetic field.
o
o
o
C (41
F~95
F) and 10~90% RH (with no condensation).
vii

Advertisement

Table of Contents
loading

Table of Contents