Download Print this page

Ltech DIN-DMX-350 Quick Start Manual

Cc dmx/rdm decoder

Advertisement

Quick Links

DIN-DMX-350
CC DMX/RDM DECODER
(DIN Rail, Screw Dual-use)
DIN-DMX-350 DIN Rail DMX decoder have 3 digits digital tube to display DMX address, simple
and intuitive read and write DMX address, meanwhile have the self-testing pattern function. With
the standard RDM remote device management protocol, supports DMX512 signal bi-directional
communication, achieves remote management of reading and writing DMX address (DMX master
controller must recognize the RDM protocol).
DIN-DMX-350 can work with DMX512 console; realize 0-100% brightness and various changing
effects, can control single color, bi-color, RGB LED light . s
1. Product Parameter:
DIN-DMX-350 CC DMX/RDM Decoder:
Input Signal: DMX512, RDM
Input Voltage: 12~48V DC
Output Voltage: 3~42V DC
Max Load Current: 350mA × 3CH
Max Output Power: 1.05W~14.7W × 3CH Max 44.1W
Dimming Range: 0~100%
Mounting: DIN Rail or Screw
DIN-DMX-350 CC DMX/RDM Decoder
warranty
5 years
DIN Rail Mounting Size: TS-35/7.5 or TS-35/15
Protection:
Short circuit / Over load
Working Temperature: -30℃~55℃
Dimensions: L112×W35×H67(mm)
Package Size: L114×W37×H70(mm)
Weight (G.W): 135g
1
2. Product Size:
3. Function Key:
Running Light
The running light flashes quickly when input
DMX signal. Flash frequency depends on
received frame rate. The running light
flashes as usual in free time.
M KEY
Short press: enter DMX decoder mode.
Long press: enter self-testing scene mode.
3.1 DMX Decoder Mode.
Address Setting:
In DMX Decoder Mode, first press "+" or "-" key to enter address setting. Changing
the DMX initial address when the 3 address value start to flicker. (Range: 001-512)
Short press to add one more address, long press to
:
+
:
Short press to subtract one more address, long press to subtract quickly.
-
:
Short press to quit.
M
Long press
and
+
key
Long press
M
at the same time, set the
at the same time, set the
brightness output to linearity
brightness output to Gamma
curve (C-L).
curve (C-E)
DIN-DMX-350 CC DMX/RDM Decoder
add
quickly.
-
Long press
and
and
key
+
-
M
-
at the same time, check the
present luminosity curve.
www.ltechonline.com
2
key

Advertisement

loading
Need help?

Need help?

Do you have a question about the DIN-DMX-350 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ltech DIN-DMX-350

  • Page 1 5 years DIN-DMX-350 DIN Rail DMX decoder have 3 digits digital tube to display DMX address, simple and intuitive read and write DMX address, meanwhile have the self-testing pattern function. With the standard RDM remote device management protocol, supports DMX512 signal bi-directional communication, achieves remote management of reading and writing DMX address (DMX master 3.1 DMX Decoder Mode.
  • Page 2 DIN-DMX-350 CC DMX/RDM Decoder DIN-DMX-350 CC DMX/RDM Decoder 3.2 Self-testing Scene Mode. 5. Attention: Long press “M” key to enter self-testing scene mode. 5.1 The product shall be installed and serviced by the qualified person. Digital Tube Display MODE Description (press +/- to switch) 5.2 This product is non-waterproof.

This manual is also suitable for:

2273300