Moving Recorded Tracks; Move Function - Sony CMT-M333NT Operating Instructions Manual

Moving recorded tracks

— Move Function

You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2
Track number
1 2 3
Original
A B
tracks
2
1
After
A C
MOVE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO.
3
Press . or > repeatedly until
"Move?" appears, then press ENTER/
YES.
Playback starts.
4
Press . or > repeatedly until the
desired track number to move appears,
then press ENTER/YES.
5
Press . or > repeatedly until the
new track position appears.
Original track
number
6
Press ENTER/YES.
"Complete!" appears for a few seconds and
the moved track starts playing.
4
C D
3 4
B D
New track
position
TOC
Note
When you move a track to a track number that is
registered into a group, the moved track is re-registered
into the group. In addition, if you move a track that is
registered into a group to a track number that is not
registered into a group, the group registration of the
moved track is released. However, when the Group
Function is on, you can only move tracks within the
selected group.
GB
31