Recording From The Radio; Recording From Another Tape (Dubbing) - Sony MHC-W77AV Operating Instructions Manual

18
| SSB gg |
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE TI (CrO2)
tape.
SYSTEM
POWER > ON
DOLBY NR
1 Press 8 EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording starts from the front side of
the tape, unless you change the'playing
direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press TUNER/BAND several times until
the desired radio band appears.
3 Tune in the radio station you want to
record. (See "Listening to the Radio", or
"Playing Preset Radio Stations" for
details.)
4 select dual or single-sided recording.
Press DIRECTION
MODE to select
To record
—
One side a
of the tape
Both sides*
c=) or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front sitle.-
5 Press @ REC.
Deck B stands by for recording.
6 Press H PAUSE to release recording
pause.
Recording starts.
Chapter 4: the Tape Player
To stop recording
Press Ml on the tape player.
To reduce noise during AM recording
If a whistling noise is heard while
recording, reorient the AM loop antenna for
optimum reception.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 4.
—_SS=aBhA29BB——E—E——SSasy)
Recording From
Another Tape
(dubbing)
Dubbing Another Tape
Automatically
You can record the whole tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit to do this
operation and TYPE [ (normal) or TYPE II
(CrO2) tape for dubbing.
SYSTEM
POWER > ON
1 34 12
1 Press & EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback start from the
front side of the tape, unless you change
the playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Choose how you want the tape to record
and press DIRECTION MODE
repeatedly until the desired mode
appears.
Indication Operation
— Dubbing stops at the end of
one side.
cs) When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape
position in the other deck.
KELAY When the tape in one deck
reaches its end of the front
side, it stops until the other
tape come to its end, and
then both tapes reverse
together.
3 Press HIGH SPEED DUBBING.
Deck B stands by for recording.
4 Press I PAUSE.
The tape starts dubbing.
If you set DIRECTION MODE to ¢) or
RELAY, recording always stops at the
end of the reverse side.
To stop dubbing
Press Hf.
You do not have to press DOLBY NR with
high speed dubbing
The tape in deck B is automatically
recorded in the same state as the tape in
deck A.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
TYPE I (normal) or TYPE II (CrO2) tape for
recording.
SYSTEM
POWER > ON
DOLBY NR