802.1X; Rtsp - Motorola hellosecurity User Manual

2 megapixel lpr network camera

Table of Contents

Network Camera User Manual

Note: Please use the different version in accordance with the security level you required. The

higher the version is, the higher the level of the security is.

4.6.6 802.1x

If it is enabled, the camera's data can be protected. When the camera is connected to the

network protected by the IEE802.1x, user authentication is needed.

To use this function, the camera shall be connected to a switch supporting 802.1x protocol.

The switch can be reckoned as an authentication system to identify the device in a local

network. If the camera connected to the network interface of the switch has passed the

authentication of the switch, it can be accessed via the local network.

Protocol type and EAPOL version: Please use the default settings.

User name and password: The user name and password must be the same with the user name

and password applied for and registered in the authentication server.

Go to ConfigNetworkRTSP.

Select "Enable" to enable the RTSP function.

Port: Access port of the streaming media. The default number is 554.

RTSP Address: The RTSP address (unicast) format that can be used to play the stream in a

media player.

Table of Contents