Motorola hellosecurity User Manual page 20

Network Camera User Manual
Backlight Compensation (BLC):

Off: disables the backlight compensation function. It is the default mode.

HWDR: WDR can adjust the camera to provide a better image when there are both very
bright and very dark areas simultaneously in the field of the view by lowering the brightness
of the bright area and increasing the brightness of the dark area.
Recording will be stopped for a few seconds while the mode is changing from non-WDR to
WDR mode.

HLC: lowers the brightness of the entire image by suppressing the brightness of the
image's bright area and reducing the size of the halo area.

BLC: If enabled, the auto exposure will activate according to the scene so that the object
of the image in the darkest area will be seen clearly.
HFR: High Frame Rate. If "ON" is selected, the system will restart and then the maximum
value of the frame rate of the main stream can be set to 60 fps /50fps.
Antiflicker:

Off: disables the anti-flicker function. This is used mostly in outdoor installations.

50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.
Smart IR: Choose "ON" or "OFF". This function can effectively avoid image overexposure
and underexposure by controlling the brightness of the IR lights according to the actual
conditions to make the image more realistic. Please enable it as needed.
White Balance: Adjust the color temperature according to the environment automatically.
Frequency: 50Hz and 60Hz can be optional.
Day/Night Mode: Choose "Auto", "Day", "Night" or "Timing".
Infra-red Mode: Choose "Auto", "ON" or "OFF".
Exposure Mode: Choose "Auto" or "Manual". If manual is chosen, the digital shutter speed
can be adjusted.
Corridor Pattern: Corridor viewing modes can be used for situations such as long hallways.
0, 90, 180 and 270 are available. The default value is 0. The video resolution should be 1080P
or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Schedule Settings of Image Parameters:
Click the "Schedule" tab as shown below.
Set full time schedule for common, day, night mode and specified time schedule for day and
night. Choose "Schedule" in the drop-down box of schedule as shown below.
15