Kioti CK3510 Installation Instructions Manual page 7

6. Remove the bearing holder bracket (A) from
the vehicle body and install the optional
bearing holder bracket (3) to the body.
Then, install the plain washer (27) and snap
ring (26).
7. Install the damper (A) and brake spring (B)
which were removed in the above step 6.
TC2SZ20A
8. Install the connecting plate (4) to the
bearing holder bracket side with the plain
washer (22) and snap pin (33). Then, fit the
head pin (32) to the connecting lever  side
and install the plain washer (22) and snap
pin (33).
※ Connecting plate mounting location by
engines
TC2SZ21B
TC2SZ22A
9. Install in the reverse order of the above step
2 and 3.
- 7 -
REmARKS
CK3510(H)/4010(H)
TC2SZ23A
Tier4 Engine
Tier3 Engine
TC2SZ25A