Advertisement
4. Unscrew two steering column mounting nuts
(A) and attach the lever mounting bracket
(0).
5. Install the wire retaining bracket (3) to the
steering column support with two flange bolts
(2).
TC2SZ04A
6. Fit the plain washer (29) to the spiral axis
section of the lever mounting bracket and
insert the RPM linked lever (4) into the lever
mounting bracket's spiral axis section. Then,
fit the spring (30) and plain washer (29) and
tighten one nut (3) to the degree where
the lever can be operated freely. Finally, fix
the lever with the remaining nut. Insert the
handle (25) to the lever.
Plain Washer(29) fitted on left side of RPM
TC2SZ05A
linked Lever(4) should be installed or not
according to the cases below.
Instrument cluster cover (D-shaped) model:
Need to be installed
TC2SZ06A
Instrument cluster cover (straight shaped)
model: No needed
- 4 -
REmARKS
CK3510(H)/4010(H)
TC2SZ07B
TC2SZ27A
TC2SZ26A
Advertisement
