2 ] County Set Mode - Brother P-touch PT-2730 Service Manual

[ 2 ] County Set mode

Press the [OK] / [ENTER] key from the state of "Figure 3.3-3", and the "Figure 3.3-4"
will be displayed.
Shift to the "Figure 3.3-5" by pressing the [OK] / [ENTER] key. The current
specification is displayed in the lower right on the LCD. In this screen, change the
indication of the specification at the same time by pressing the [1] to [5] key.
Shift to the "Check LCD indication" by pressing the [OK] / [ENTER] key.
COUNTRY SET
Figure 3.3-4
Europe/North America specifications
1USA 2GBR 3FRA
4DEU 5AUS
Figure 3.3-5
III - 50
[USA]