Control Code List; Commands That Can Be Set Or Obtained In P-Touch Template Mode - Brother P-touch PT-9800PCN Template Manual

Control code list

Commands that can be set or obtained in P-touch Template mode

^PT 5E 50 54
^PS 5E 50 53
^PC 5E 50 43
^SS 5E 53 53
^TS 5E 54 53
^CF 5E 43 46
^CH 5E 43 48
^CP 5E 43 50
^MP 5E 4D 50
^LS 5E 4C 53
^CC 5E 43 43
^RC 5E 52 43
^CN 5E 43 4E
^NN 5E 4E 4E
^ID 5E 49 4E
^QV 5E 51 56
^FC 5E 46 43
^II 5E 49 49
^OP 5E 4F 50
^SR 5E 53 52
^VR 5E 56 52
^CR 5E 43 52
^OS 5E 4F 53
^ON 5E 4F 4E
^DI 5E 44 49
ESC ia 1B 69 61
* The commands listed above must be used in P-touch Template mode.
They cannot be used in raster mode or ESC/P mode. (except ESC ia)
Dynamic Select print start trigger
Dynamic Specify print start command text string
Dynamic Specify print start received character count
Dynamic Specify delimiter
Dynamic Select template
Dynamic Full cut setting
Dynamic Half cut setting
Dynamic Chain printing setting
Dynamic Mirror printing setting
Specify line spacing with line feed
Dynamic Change prefix character
Dynamic Specify line feed command text string
Specify number of copies
Specify number of Numbering copies
Initialize template data
Dynamic Specify QR Code version
Dynamic FNC1 replacement setting
Initialize
Perform machine operations (feed/cut)
Status request
Retrieve version Information
Line feed in object
Select object (object number)
Select object (object name)
Directly insert object
Dynamic Specify command mode
5