Brother P-touch PT-2730 Service Manual page 75

When the NG is judged in either sensor, the "Figure 3.3-19" will be displayed. Return
to the first inspection.
(Shift to the "Figure 3.3-13" by pressing / releasing the cassette sensor 1 in the state
of the "Figure 3.3-19".)
Figure 3.3-19 NG Judgment Display Example
After completion of checking of all cassette sensors, the "Figure 3.3-20" will be
displayed.
If the "Figure 3.3-20" is displayed, set the "24mm laminate black ink ribbon tape
cassette" and close the cover.
After closing the cover, print the "Figure 3.3-21" by pressing the below key, the "Figure
3.3-22" will be displayed while printing.
* Europe/North America specifications: [OK] / [ENTER]
CASSETTE
Set 24mm TZ
Figure 3.3-20
<Example>
001
A
1USA
First line: Last three digits of the PCB ASSY parts code
Second line: Head rank
Third line: Vary from keyboard specification
Figure 3.3-21
* * O K * *
Figure 3.3-22
III - 55
1 X