Brother P-touch PT-2730 Service Manual page 30

(4) Remove the retaining ring.
(5) Pull the end of the roller holder release spring out of the section "B" which is the
hole provided on the chassis ASSY.
(6) Remove the roller holder ASSY and the roller holder release rod from the chassis
ASSY.
(7) Remove the roller holder release spring from the roller holder ASSY.
NOTE: Do not touch the roller of the roller holder ASSY.
Retaining ring
Roller holder ASSY
Chassis ASSY
Figure 3.1-10 Disassembling the Chassis ASSY (2)
Roller holder release rod
6b
6a
Roller holder release spring
III - 10
Roller holder release spring
"B"
5