7 ] Installing The Power Pcb Assy - Brother P-touch PT-2730 Service Manual

[ 7 ] Installing the Power PCB ASSY

CAUTION: When handling the PCBs, put on the grounding wrist band. Failure to do
so might break LSIs and other electronic devices.
(1) Set the power PCB ASSY to the upper cover with the screw.
(2) Connect the two connectors of the power PCB ASSY to the main PCB ASSY.
NOTE: When wiring, pass the lead wires through the guides and the slits as shown the
below figure.
Power PCB ASSY
Slit
Guide
Guide
Power PCB ASSY
leads "B"
Hook
Positive, Negative
battery terminal leads
Power PCB ASSY
Positive battery terminal
Negative battery terminal
Guide
Guide
Slit
Main PCB ASSY
Slit
Figure 3.1-38 Installing the Power PCB ASSY
III - 34
Screw
Power PCB ASSY
leads "A"
Power PCB ASSY
leads "A"
Power PCB ASSY
leads "B"
Power PCB ASSY
connectors
Main PCB ASSY