Table of Contents
Advertisement
Print Labels
Preview
Use this feature to check the final design
before printing.
Print
Start printing.
When printing a single label:
/
When printing multiple labels:
Select a print quantity
/
/
Numbering
Set this feature when printing consecutive
Print
alphanumeric characters to add a
+
serialised number to each label.
Enter alphanumeric characters
+
/
position
/
end position
a print quantity
Mirror
Print reversed from left to right.
Print
Print on clear tape and attach it to the
+
inside of glass to create a label that can
be read from the outside.
Enter text
[Mirror]
/
Barcode
Create a barcode and print it.
Printing
[Barcode]
Select a setting item
Change the setting content
/
Enter barcode data
Select a signal
/
Other
Feed &
Feed approx. 23 mm of tape to remove
Cut
any slack, and then cut it.
+
+
Other (cont.)
Save
/
For more information about using your Label Printer, see the User's Guide on the Brother support website at
support.brother.com.
Symbols and Frames
[Number]
Symbol Examples (
Set the start
Set the
/
Select
/
/
Auto Format Layouts Examples (
+
/
/
/
For more information about symbols and frames, see the User's Guide on the Brother support website at support.brother.com.
Set Margins
By default the printer creates a laminate margin of approx. 23 mm at the beginning of each label. To reduce this margin, print multiple
labels continuously.
You can also change the margin before and after the text for the second and subsequent labels when printing multiple labels.
/
Select [Chain] to print labels with the narrowest margin width. DO NOT feed the tape until the final label is printed. When the final
label prints, cut it manually using the [Feed & Cut] function.
: Print area
ABC A
Large Margin
2 mm
ABC
Approx.
23 mm
Chain
2 mm
ABC
Approx.
23 mm
Save your labels and access them later to
edit and print them, as well as overwrite
and save edited data.
Maximum number of saved labels: 99 files
Maximum character count per file:
280 characters
Create a label
[Save]
/
Select a save destination
)
[Auto Format])
: Margin
Small Margin
When the label length is approx. 23 mm
or more
2 mm
2 mm
2 mm
ABC
Approx.
Approx.
Approx.
Approx.
23 mm
23 mm
23 mm
23 mm
No Cut
2 mm
Cut Position
ABC
Approx.
2 mm
23 mm
Reset
Reset the internal memory, for example,
to reset the Label Printer or delete any
saved label data.
Select a reset method
Confirmation message
/
Frame Examples (
...
Accented Character Examples (
...
: Laminate Margin
2 mm
2 mm
2 mm
ABC
ABC
2 mm
2 mm
2 mm
ABC
ABC
2 mm
[Settings]
/
[Reset]
/
/
/
[Frame])
...
)
...
Small Margin
When the label length is approx. 23 mm
or less
2 mm
A
A
Approx.
2 mm Approx.
23 mm
23 mm
Special Tape
2 mm
2 mm
2 mm
ABC
ABC
Approx.
2 mm
23 mm
Advertisement
Table of Contents
