Table of Contents
Advertisement
62
Occupant safety
Always lock rear seat backrests after
#
fitting Top Tether belts.
Pay attention to the lock verification
#
indicator.
If the left and right seat backrests are not
engaged and locked in place, this will be shown
on the multifunction display on the instrument
cluster.
If the centre seat backrest is not engaged and
locked in place, the red lock verification indica‐
tor will be visible.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by a Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
If necessary, slide head restraint
#
(
page 100).
/
Fold up cover
2
of Top Tether anchorage
#
3.
Fit the ISOFIX or i‑Size child restraint system
#
with Top Tether. In doing so, comply with the
child restraint system manufacturer's instal‐
lation instructions.
Guide Top Tether belt
#
restraint
1
bars.
Hook Top Tether hook
#
4
into Top Tether anchorage
twisting.
1
upwards
Tension Top Tether belt 4. In doing so, com‐
#
ply with the child restraint system manufac‐
turer's installation instructions.
Fold down cover
#
3.
If necessary, slide head restraint
#
wards (
page 100). Make sure that you do
/
4
under head
between the two head restraint
5
of Top Tether belt
3
without
2
of Top Tether anchorage
1
down‐
Advertisement
Table of Contents
