Table of Contents
Advertisement
344 Wheels and tyres
Removing a wheel
Requirements:
The vehicle is raised (
page 341).
/
R
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
Screw centring pin
1
into the thread
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
Fitting a new wheel
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
& WARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts to come loose, as too can dam‐
aged wheel bolts or wheel hub threads.
Never oil or grease the threads.
#
In the event of damage to the threads,
#
contact a qualified specialist workshop
immediately.
Have the damaged wheel bolts or dam‐
#
aged hub threads replaced.
Do not continue driving.
#
Observe the information on the choice of
#
tyres (
page 336).
/
For tyres with a specified direction of rotation,
an arrow on the side wall of the tyre indicates
the correct direction of rotation. Observe the
direction of rotation when fitting.
Slide the wheel to be mounted onto the cen‐
#
tring pin and push it on.
Advertisement
Table of Contents
