Mercedes-Benz E-Class Coupe 2020 Owner's Manual page 44

* NOTE Deployment of the seat belt ten‐
sioner and side impact airbag when the
front passenger seat is unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied front
passenger seat, the seat belt tensioner and
the side impact airbag may also deploy in the
event of an accident along with other sys‐
tems.
Only one person should use each seat
#
belt at any one time.
Vehicles without automatic front passenger
airbag shutoff:
* NOTE Deployment of the seat belt ten‐
sioner when the front passenger seat is
unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied front
passenger seat, the seat belt tensioner may
also deploy in the event of an accident along
with other systems.
Only one person should use each seat
#
belt at any one time.
Seat belt adjustment function
®
Vehicles with PRE-SAFE : if the front seat belt
is not pulled tightly across your body, the seat
belt adjustment may automatically apply a cer‐
tain tightening force. Do not hold the seat belt
tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem ( page 41).
/
Releasing a seat belt
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Occupant safety
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
© Settings Vehicle
4 5 5
Activate or deactivate Belt
#
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
41
adjustment.