Table of Contents
Advertisement
328 Breakdown assistance
When the fuse box is open, make sure
#
that no moisture can enter the fuse
box.
When closing the fuse box, make sure
#
that the seal of the lid is positioned cor‐
rectly on the fuse box.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified special‐
ist workshop.
Ensure the following before replacing a fuse:
The vehicle is secured against rolling away.
R
All electrical consumers are switched off.
R
The ignition is switched off.
R
The electrical fuses are located in various fuse
boxes:
Fuse box in the engine compartment on the
R
driver's side (
page 328)
/
Fuse box on the driver's side of the cockpit
R
(
page 329)
/
Fuse box in the front passenger footwell
R
(
page 329)
/
Fuse box in the boot on the right-hand side
R
of the vehicle, when viewed in the direction
of travel (
page 329)
/
Opening and closing the fuse box in the
engine compartment
Requirements:
A dry cloth and a screwdriver are available.
R
Observe the notes on electrical fuses
(
page 327).
/
Opening
& WARNING Risk of injury from using the
windscreen wipers while the engine bon‐
net is open
When the engine bonnet is open, and the
windscreen wipers are set in motion, you can
be trapped by the wiper linkage.
Always switch off the windscreen wip‐
#
ers and ignition before opening the
engine bonnet.
Turn clips
2
on cover
1
anti-clockwise a
#
quarter-turn.
Pull cover
1
upwards in the direction of the
#
arrow.
Advertisement
Table of Contents
