Dynamic Select Switch - Mercedes-Benz E-Class Coupe 2020 Owner's Manual

164 Driving and parking
Foot off the accelerator prompt, the segments
will remain white.
If the event involves a vehicle in front, all seg‐
ments will immediately turn green once there is
a response to the Foot off the accelerator
prompt.
For active ECO Assist in drive program ;,
symbol 3 will appear on the multifunction dis‐
play and on the head-up display beside transmis‐
sion position h. Symbol 3 will also appear
when the assistant display is not selected.
If the system does not intervene during the
event ahead, nothing will be displayed. The sys‐
tem will be passive.
ECO Assist is active only in drive programs ;
and A.
System limits
ECO Assist can function even more precisely if
the route is adhered to when route guidance is
active. The basic function is also available with‐
out active route guidance. Not all information
and traffic situations can be foreseen. The qual‐
ity depends on the map data.
ECO Assist is only an aid. The driver is responsi‐
ble for keeping a safe distance from the vehicle
in front, for vehicle speed and for braking in
good time. The driver must be ready to brake at
all times irrespective of whether the system
intervenes.
The system may be impaired or may not function
in the following situations:
If visibility is poor, e.g. due to insufficient illu‐
R
mination of the road, highly variable shade
conditions, rain, snow, fog or heavy spray.
If there is glare, e.g. from oncoming traffic,
R
direct sunlight or reflections.
If there is dirt on the windscreen in the area
R
of the multifunction camera or the camera is
misted up, damaged or obscured.
If traffic signs are hard to discern, e.g. due to
R
dirt, snow or insufficient lighting, or because
they are obscured.
If the information on the navigation system's
R
digital map is incorrect or out of date.
If signs are ambiguous, e.g. traffic signs in
R
roadworks or in adjacent lanes.
Displaying ECO Assist
On-board computer:
Assistance
4
Select ECO Assist.
#

DYNAMIC SELECT switch

Function of the DYNAMIC SELECT switch
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
% Depending on the engine and equipment,
the vehicle has different drive programs.
Use the DYNAMIC SELECT switch to change
between the following drive programs:
= (Individual): individual settings
B (Sport +): particularly sporty driving style
C (Sport): sporty driving style