Table of Contents
Advertisement
242 Driving and parking
Depending on the bicycle rack's design, up to
three bicycles can be transported on the bicycle
rack.
When mounted by attaching to ball head 1, the
maximum load capacity is 75 kg.
The load capacity is calculated from the weight
of the bicycle rack and the bicycle rack load.
The vehicle's driving characteristics will change
when a bicycle rack is fitted. Adapt your driving
style accordingly. Drive carefully and maintain a
safe distance.
When using a bicycle rack, set the tyre pressure
for maximum loading on the rear axle of the
vehicle. Further information on the tyre pressure
can be found in the tyre pressure table
(
page 333).
/
Notes on loading
The larger the distance between the load's
centre of gravity and the ball head, the greater
the load on the trailer hitch.
Therefore, observe the following notes:
mount heavy bicycles as close to the vehicle
R
as possible
always distribute the load on the bicycle rack
R
as evenly as possible across the vehicle's
longitudinal axis
Mercedes-Benz recommends removing all
detachable parts from bicycles (e.g. baskets,
child seats, rechargeable batteries) before load‐
ing them onto the bicycle rack. This will improve
the aerodynamic resistance and centre of gravity
of the bicycle rack.
Always secure the bicycles to prevent them from
moving around and check them at regular inter‐
vals to ensure that they are secure.
Do not use tarpaulins or other covers. The driv‐
ing characteristics and rear view may be
impaired. In addition, aerodynamic resistance
and the load on the trailer hitch will increase.
Load distribution on the bicycle rack
1
Vertical distance between centre of gravity
and ball head
2
Horizontal distance between centre of grav‐
ity and ball head
3
The centre of gravity is on the vehicle's
centre axis
Advertisement
Table of Contents
