Mercedes-Benz E-Class Coupe 2020 Owner's Manual page 361

358 Technical data
% Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
Missing values were not available at the time of
going to press.
Petrol engines MB-Freigabe or MB-
E 450 4MATIC
All other models 229.51, 229.52,
Diesel engines
E 300 d 4MATIC
E 400 d 4MATIC
All other models
Approval
229.5
* recommended for lowest possible fuel con‐
229.6*
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes)
229.61
To achieve the lowest possible fuel consumption,
229.71*
it is recommended to use the engine oil specifi‐
cations marked in the table for the lowest SAE
viscosity class. Possible restrictions of the
approved SAE viscosity classes must be
observed.
% If the engine oils listed in the table are not
available, you may add a maximum of
1.0 litre of the following engine oils once
only.
Engine oils for one-time filling only in exceptional
MB-Freigabe or MB-
cases:
Approval
petrol engines:
R
-
229.52
229.61* -
229.52, 229.61
diesel engines:
R
229.71*
-
-
The following values refer to an oil change,
including the oil filter.
Missing values were not available at the time of
going to press.
Model
E 200 4MATIC
E 220 d
E 220 d 4MATIC
E 450 4MATIC: MB-Freigabe or MB-
Approval 229.3 or ACEA A3/B4
all other models: MB-Freigabe or MB-
Approval 229.31 or ACEA C3
E 400 d 4MATIC: MB-Freigabe or MB-
Approval 229.51 or ACEA C3
all other models: ACEA C3
Capacity
6.0 litres
6.3 l