Table of Contents
Advertisement
Fold the wiper arms back onto the wind‐
#
screen.
Switch on the ignition.
#
Press the î button on the combination
#
switch.
The wiper arms will move into the original
position.
Switch the ignition off.
#
Maintenance display
The maintenance display is available only with
standard windscreen wipers.
Remove protective film
1
#
nance display on the tip of the newly fitted
wiper blades.
When the colour of the maintenance display
changes from black to yellow, the wiper blades
should be replaced.
%
The duration until the colour changes varies
depending on the usage conditions.
Replacing the windscreen wiper blades
(MAGIC VISION CONTROL)
Moving the wiper arms to the replacement
position
Switch the ignition on and switch off again
#
immediately.
Within around 15 seconds, press and hold
#
the î button on the combination switch
for approximately 3 seconds (
The wiper arms will move into the replace‐
ment position.
from the mainte‐
Light and sight 135
page 133).
/
Advertisement
Table of Contents
