Reprogramming/Calibration; Shipping And Transporting The Saros; Storing And Discarding The Saros - Saros 4000 Operator's Manual

Operator Manual
All reprogramming of the circuit boards shall be performed by CAIRE, Inc or by a factory authorized service center. Flow calibration is
required whenever replacing an ATF, control board, compressor, or proportional valve. Flow calibration can be done at a CAIRE authorized
service center or in the field using item T-10560. See manual MN053 for details on performing flow calibration and firmware updates in the
field using item T-10560.
When shipping the SAROS use original packaging if possible. Always remove the Battery from the SAROS before shipping.
If original packaging material is available repack the SAROS, Battery and power supplies in the designated packaging area.
If original packaging material or other CAIRE Inc. authorized shipping container is not available, contact CAIRE Inc. for replacement ship-
ping container.
WARNING: Do not expose the SAROS to water. The SAROS enclosure does not provide protection against the harmful ef-
fects of liquid ingress. Electrical shock or damage to the unit may result.
STORING THE SAROS
Heat and humidity may degrade the performance or severely damage the SAROS. Store the device in a cool, dry protected area away from
high temperatures, moisture and humidity. Remove the Battery when storing the device.
Ensure that all recommended maintenance procedures in section 5.0 are performed while the device is in storage. It is especially important
that the 3-month requirement to run the device and fully drain the SAROS battery be performed while the unit is in storage to ensure proper
operation.
Discarding the SAROS
Battery Disposal: Your Battery is rechargeable and can be recycled. Always return it to an authorized service center or CAIRE Inc. for proper
disposal. You can also contact your local city or town offices for instructions on proper disposal of
the Battery.
SAROS: Local environmental laws may prohibit disposal of electrical and/or electronic equipment such as the SAROS and AC Power
Adapter. Contact the local city, town or country offices for instructions on proper disposal of electrical or electronic equipment. Alternately,
CAIRE Inc. may be contacted for disposal information at 1-800-482-2473.

7.0 REPROGRAMMING/CALIBRATION

8.0 SHIPPING AND TRANSPORTING THE SAROS

9.0 STORING AND DISCARDING THE SAROS

MN255-1 C | 33