Introduction To Your Saros Oxygen System; Description Of The Saros Assembly-Shippable; Figure 2-1. Saros Components - Saros 4000 Operator's Manual

Operator Manual
This operator manual will inform you about the use and care of the SAROS and its standard components. Please read thoroughly all of the
information in this manual before operating the SAROS and receive proper training on the use and care of this device.
A PHYSICIAN HAS PRESCRIBED SUPPLEMENTAL OXYGEN AS PART OF A TREATMENT PLAN TO MEET AN INDIVIDUAL'S
CLINICAL NEEDS. OXYGEN FLOW MODES AND SETTINGS SHOULD BE ADJUSTED ONLY UNDER THE ADVICE OF A PHYSI-
CIAN OR CLINICIAN. THESE SHOULD BE PERIODICALLY REASSESSED FOR THE EFFECTIVENESS OF THE THERAPY.
A representation of the major features of the SAROS hardware interface are shown below:
• Membrane Panel containing:
• 9V Battery
• Oxygen Outlet Port
• External Power Connector
• Battery
• Simplified User Instructions Label
• Main / Rating Label
• Air Inlet Filter
• HEPA Filter
Become familiar with the key features of the SAROS and the user control panel.
ADDITIONAL PARTS
24 VDC Cable: 9727-SEQ
AC Power Supply 9726-1-SEQ and Power Cord 4997-SEQ (North America) or 4998-SEQ (EU)
Carry Strap 21495456
Main/Rating
Label
(underneath)

2.0 INTRODUCTION TO YOUR SAROS OXYGEN SYSTEM

- Five tactile buttons allow control of all user controllable settings
- Four variable intensity LED indicators provide overall status
- An 8-character LCD display shows settings
2.1 DESCRIPTION OF THE SAROS ASSEMBLY—SHIPPABLE
SAROS Shell
Battery

Figure 2-1. SAROS Components

External
Power
Connector
Membrane
Panel
Simplified User
Instructions
Label (behind)
Air Inlet Filter
(9798-SEQ)
9V Battery
(9257-SEQ)
HEPA
Filter
(4770-SEQ)
Inlet Cover
(9758-SEQ)
Oxygen
Outlet Port
(9764-SEQ)
MN255-1 C | 13