Fujitsu MB95200H Series Operation Manual page 16

Connector
Circuit type
pin number
3 Open drain output
4 CMOS input
CMOS input
8
Open drain output
*1: The "H" level output current.
*2: The "L" level output current.
*3: The input leakage current.
*4: Does not include the current through the pull-up resistance.
*5: The voltage monitoring IC controls the on/off connection to the GND via bus switch.
BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 6 Specifications
Table 5 DC specifications of the user interface
IOH*1 IOL*2
(mA) (mA)
- 64.0 *4 1 *4
- -
- 4.0 *4
MCU-UM-500001-E-11 – Page
ILI*3
Resistor connection
( A)

Connected to UVCC
by 47k

± 5 *4
See Figure 6.4.2
5 *4
±
10
Remarks
Connected to GND
via analog switch*5