Inspection And Maintenance; Service And Inspection Intervals - Siemens SIMOTICS S-1FT2 Operating Instructions Manual

Injuries caused by stirred-up foreign bodies and dust when working with compressed
air
When you clean using compressed air, this can stir up dust, metal chips and cleaning
agents, and so cause injuries.
• When cleaning using compressed air, make sure you use suitable extraction equipment
Danger to life when lifting and transporting
Incorrect lifting and transport operations, devices and equipment that are unsuitable or
damaged can result in death, severe injury and/or damage to property.
• The motor must not be lifted or transported by means of the power connector or signal
10.2

Inspection and maintenance

10.2.1

Service and inspection intervals

To avoid motor faults, perform maintenance work, inspections and overhauls at regular
intervals.
NOTICE
Damage to the motor due to improper maintenance
Improper maintenance can cause damage to the motor.
• Service and maintenance must only be performed by qualified personnel.
• Use original Siemens parts only.
NOTICE
Damage to the motor due to faults or unusual conditions
Unusual conditions or faults that represent overstressing of the motor, for example,
overload or short-circuit, can result in consequential damage to the machine.
• Immediately perform an inspection when faults or exceptional conditions occur.
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 07/2021, A5E50610821B AB
CAUTION
and wear protective equipment (safety goggles, protective suit, etc.).
WARNING
connector.
Maintenance
10.2 Inspection and maintenance
83