Siemens SIMOTICS S-1FT2 Operating Instructions Manual page 23

European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the use
of certain hazardous substances.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
The SIMOTICS motor series complies with the 2012/19/EU directive on taking back and
recycling waste electrical and electronic equipment.
European Directive 2005/32/EC defining requirements for environmentally friendly
design of electric motors
The SIMOTICS motor series is not subject to Regulation (EC) No. 640/2009 for
implementation of this directive.
European Directive 2009/125/EC defining ecodesign requirements of electric motors and
speed controls
The SIMOTICS motor series is not subject to Regulation (EU) 2019/1781 for implementation
of this directive.
Eurasian conformity
SIMOTICS motors comply with the requirements of the Russia/Belarus/Kazakhstan (EAC)
customs union.
China Compulsory Certification
SIMOTICS motors do not fall within the scope covered by the China Compulsory Certification
(CCC).
CCC negative certification:
CCC product certification (https://support.industry.siemens.com/cs/ww/en/view/93012735)
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is
important that you carefully observe the contents of the quotation and that there is a cUL
mark on the rating plate!
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates for SIMOTICS motors can be downloaded from the Internet at the following link:
Certificates for SIMOTICS motors
(https://support.industry.siemens.com/cs/ww/en/ps/13347/cert)
China RoHS
SIMOTICS motors comply with the China RoHS.
You will find more information at:
China RoHS (https://support.industry.siemens.com/cs/ww/en/view/109772626)
SIMOTICS S-1FT2 synchronous motors for SINAMICS S120
Operating Instructions, 07/2021, A5E50610821B AB
2.2 Technical features and environmental conditions
Description of the motors
21