Table 001-3: Machine Settings (Customer Programming) - Miele CM6 Technical Information

Technical Information
Function
Info
System lock
Water hardness
Display brightness
Volume
Cup heating (CM 63x0 only)
Showroom program
Factory default

Table 001-3: Machine Settings (Customer Programming)

1
To prevent limescale buildup in the heater, descaling must be carried out more frequently with hard
water.
2
The set water hardness will affect when "50 servings until descaling" is displayed; see Table C-3.
Back:
Press the
Setting
No. of
drinks
Number of
uses until
On
Off
Soft (0 - 4 grains per gallon)
Medium (5 - 9 grains per gallon)
Hard (10 - 18 grains per gallon)
Very hard (> 18 grains per gallon)
Level 1 to 7 (dark to bright) (Level 4)
Buzzer tones
Keypad tone
On
Off
On
Off
Do not reset
Reset (not available in
demo mode)
touchpad.
Latte
macchiato
Long coffee
The number of serving cycles carried
Caffê Latte
out is displayed.
Hot milk
Milk froth
Hot water
The number of servings until
Descaling
descaling is required is displayed.
The number of servings until brew
Degreasing
unit degreasing is required is
the brew
displayed.
unit
System lock is switched on.
The machine can be
safeguarded against accidental
switch-on.
System lock is switched off.
Level 1 to 7 (quieter to louder)
(Level 4)
Level 1 to 7 (quieter to louder)
(Level4)
The demonstration mode has
been activated. The appliance
can be operated but heating
will not take place.
The demonstration mode is
deactivated. Heating will take
place.
All modifications made by the
customer will not be reset to
standard settings.
All modifications (except the
language setting) will be reset
to standard settings. The
showroom program remains
unchanged. Settings made in
service programming mode
and in service mode remain
unchanged.
36
CM6