Top Cover Removal; Table 001-5: Service Mode; Table 001-6: Brew Unit Position Switches - Miele CM6 Technical Information

CM6
Function
Operation
Exit

Table 001-5: Service Mode

1
To prevent mechanical damage, always initialize as a last step.
2
To prevent mechanical damage, always initialize as a last step.
3
Data not available.
4
In order to avoid damage to the water-carrying parts, always drain the system before storage or
transport and particularly in winter.
5
Only operate the heater briefly so that it does not get too hot and trip the fuse.
S60-1 (top switch)
0 Activated
1 Not activated
0 Activated

Table 001-6: Brew Unit Position Switches

Back:
Press the
Save and quit:
Press the
4.5

Top Cover Removal

1. Disconnect the power cord.
2. Take out the drip tray.
3. Take out the water tank.
4. Take off the beans container lid.
5. Empty the beans from the beans container into a separate bowl.
6. Remove the 3 top cover screws (T10); see Figure 001-22, Item 1, and Figure 001-
23, Item 1.
Options
(Touch-) sensors
(press the
touchpad to be
tested; the
number of the
touchpad sensor
is displayed)
Leave service mode
Cancel
Switch state
S60-2 (bottom switch)
1 Not activated
0 Activated
0 Activated
touchpad.
touchpad. The appliance is switched off.
Technical Information
Sensor 104 pressed
Sensor 67 pressed
Brew unit position
Home (see Section 001-2.3.4)
Compressing (see Section 001-2.3.5)
Drainage (see Section 001-2.3.6)
41
Description