Programming The Amount For Hot Water Via The Hot Water Sensor; Programming The Amount Via "Settings - Miele CVA 5060 Operating And Installation Manual

Programming the amount: setting the portion sizes
Programming the amount for
hot water via the Hot water
sensor
^ Place the appropriate cup for the
amount you want to programme
under the hot water spout.
^ Touch the Hot water sensor until
"Prog. the amount" appears in the
display.
^ Once sufficient water has flowed into
the cup and "Save" shows in the
display touch the Hot water sensor
again.
Each subsequent portion of hot water
will then have the same amount.
Programming the amount via
"Settings"
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
Settings
Prog. the amount
Amount of coffee
^ Use the arrow sensors to highlight
"Prog. the amount", and then touch
the OK sensor.
^ Use the arrow sensors to select the
drink you wish to set the amount for.
^ Select "Start" and touch the OK
sensor.
The procedure is now the same as for
programming the amount using the OK
sensor or the Hot water sensor.
43