Table of Contents
Advertisement
The cleaning process cannot be
cancelled. It must be completed
through to the end.
Confirm with OK.
The process will start.
Follow the instructions in the display.
Place milk pipe in cleaning agent
appear on the display.
Making a cleaning solution:
Dissolve the cleaning agent in a
container with 200 ml of lukewarm
water. Stir the solution with a spoon
until the powder has fully dissolved.
Carrying out the cleaning process:
Place the container next to the coffee
machine and hang the milk pipework
in the solution. Make sure the milk
pipework is placed sufficiently far into
the cleaning solution.
Confirm with OK.
Follow the further instructions given
in the display.
The cleaning process is finished at the
end of the rinsing cycle.
Useful tip: Flush any residual cleaning
agent out of the milk pipework with
running water.
will
Cleaning and care
49
Advertisement
Table of Contents
