Electrical Connection - Miele CM 5310, CM 5410, CM 5510, CM 5710 Operating Instructions Manual

Table of Contents

Advertisement

Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches that of the domestic electrical
supply.
This data must match to prevent the
coffee machine from being damaged. If
in any doubt, consult a qualified
electrician.
The required connection data is
provided on the data plate. The data
plate can be found on the left-hand side
of the appliance when the drip tray is
pulled out.
The appliance is supplied with a power
supply cable ready for connection to a
120 V 60 Hz supply.
The coffee machine must be connected
to the domestic electrical supply via a
suitable earthed socket. The appliance
must be connected to an electrical
system designed in accordance with
national regulations.
The fuse rating must be at least 10 A.
The socket should be next to the
appliance and easily accessible where
possible.
Do not connect the coffee machine to
the domestic electrical supply using a
multi-socket adapter or an extension
cord. These do not guarantee the
required safety of the appliance (risk of
fire).
Do not connect the coffee machine to a
stand-alone inverter. Stand-alone
inverters are used for autonomous
power supply, e.g., a solar power
system. Power surges could trigger the
safety shut-off function. This can
damage the electronics.

Electrical connection

The coffee machine must not be used
with energy saving plugs. These
reduce the amount of energy supplied
to the appliance, causing it to overheat.
If the power supply cable is faulty, it
must only be replaced by a qualified
electrician.
69

Advertisement

Table of Contents
loading

Table of Contents