Technical Specifications - Vitek VT-6414 Manual Instruction

ENGLISH

TECHNICAL SPECIFICATIONS

Main unit
External sensor
Temperature measurement precision
Relative humidity measurement limits
Relative humidity measurement precision
External sensor data transmission
Data transmission frequency
Number of data transmission channels
Transmission range
Power supply
Main unit
External sensor
Note: - the batteries are not included.
RECYCLING
For environment protection do not throw out
the unit and the batteries with usual house-
hold waste after its service life expiration;
apply to the specialized center for further
recycling.
The waste generated during the disposal of
the unit is subject to mandatory collection
and consequent disposal in the prescribed
manner.
For further information about recycling of this
product apply to a local municipal administra-
tion, a disposal service or to the shop where
you purchased this product.
The manufacturer preserves the right to
change design, structure and specifications
от -9,9 °C до + 50 °C (от 14,18 °F до 122 °F)
from -30 °C to +60 °C (from -22 °F to +140 °F)
from 20% to 95%
433 MHz
up to 50 m
3 «АAА» batteries, 1,5 V;
external USB port
2 «АAА» batteries, 1,5 V
not affecting general principles of the unit
operation without a preliminary notification
due to which insignificant differences between
the manual and product may be observed.
If the user reveals such differences, please
report them via e-mail info@vitek.ru for receipt
of an updated manual.
Unit operating life is 3 years.
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the
Low Voltage Directive 2014/35/EU.
8
+/-1 °C
+/-5%
3
5V