Specifications - Makita DLW140 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Wheel diameter
Hole diameter
Max. wheel thickness
No load speed
Rated voltage
Dimensions
(L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
• The shape and weight vary depending on the specifications which differ country to country.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for cutting in ferrous materials with
appropriate abrasive cut-off wheel. Follow all laws and
regulations regarding dust and work area health and
safety in your country.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-3-10:
Sound pressure level (L
Sound power level (L ) : 115 dB (A)
WA
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
With European type safety guard
With safety guard other than
European type
With center cap type safety guard
With European type safety guard
With safety guard other than
European type
With center cap type safety guard
) : 103 dB(A)
pA
537 mm x 290 mm x 640 mm
537 mm x 280 mm x 640 mm
537 mm x 280 mm x 640 mm
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-3-10:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
6 ENGLISH
DLW140
355 mm
25.4 mm
3 mm
-1
3,800 min
D.C. 36 V
17.2 - 17.8 kg
15.6 - 16.3 kg
15.4 - 16.0 kg
2
) : 2.5 m/s
h
2