Farfisa PROJECT Series Technical Manual page 180

Si 31MT/1
MIXED VIDEO INTERCOM / VIDEO INTERCOM-TELEPHONE SYSTEM CONNECTED TO ONE EXTERNAL DOOR STATION
Q.ty Article
... PT 5160 + WB 5100
... PT 5660 + WB 5600 + 1283
... PT 5860 + WB 5600
... PV 1260 + WB1200 + 1283
... PV 2160 + WB 2100
... ST 7100W + WB7100
... ST740W +WB700
... FT11D
... FT105P-FT208P
... ES60-ES65
... DV2-4
1 1281
1 1382
1 PA **
1 SE **
Door station series Mody (for the composition see pages 82÷85)
1 row
1 MD41
... MD72÷74
1 MD10-11-12
... MD21 ÷ 24
... MD20 - 50
1 MD82 ÷ 812
1 MD92 ÷ 912*
1 MD30
Matrix series (for the composition see pages 88÷89)
1 MA42-43
... MA20-22-24
... MA61-62-63
... MA71-72-73
... Refers to number of users.
* Rain shelters are used instead of back boxes and hood covers.
** Articles not supplied by ACI Farfisa.
Working instructions. See pages 94, 162 and 168.
Notes
- If the maximum number of extensions is 5, you can use the PABX
FT105P.
- For the connection of name plate lamps read notes 6, 7 and 8 of the
installation instructions on page 91.
- If the control switching ON is necessary, connect terminal 4 of the timer
(dashed wire).
- For wires dimensioning and video connection refer to the installation
instructions and table on pages 91÷93.
- For other types of push-button panels see the general catalogue.
Programming
When using the telephone interface FT11D with the telephone ST740
it is necessary to programme the buttons dedicated to the intercom
functions (see page 162).
When using the PABX, the following programming must be absolutely
carried out:
- intercom interface activation
- activation to receive intercom calls
See page 168.
If the PABX is only used for the intercommunicating service,
without connection to the public telephone lines (URB1 and URB2), it is
necessary to deactivate the incoming and outgoing external lines with
the following programming:
- how to assign incoming external lines
coax
- how to assign outgoing external lines
See page 167.
Description
Videointercom FLAT + wall bracket
Videointercom + wall bracket + back box
Videointercom reflex + wall bracket
Videointercom + wall bracket + back box
Videointercom FLAT + wall bracket
Studio series monitor + wall bracket
Studio series telephone + wall bracket
Intercom-telephone interface
PABX
Intercom-telephone interface for PABX
Video distributor
Power supply
Timer
Door release push-button (optional)
Electric door lock (12VAC-1A)
2 row
MD41 Camera
MD72÷74 Module frames with back box
MD10-122-124 Modules for electric door speaker
MD222 ÷ 228 Button modules
MD20 - 50 Blank and info modules
MD82 ÷ 812 Hood covers
MD92 ÷ 912* Rain shelters with module frames
MD30 Electric door speaker (amplifier)
Camera modules with integrated audio amplifier
Blank and button modules
Front frames
Back boxes and module frames
(MT12 - Gb2004)
Application diagram
When using MD100, MD200 amplified external door stations, place this
diagram on the diagram on page 179 and line it up with the riser.
178