Advertisement
INTERNAL STATIONS
Table version
1) Apply the 12 anti-slip rubber pads supplied in
their housing under the base of the table adapt-
ers TA7100 e TA700.
2) Pass the connection cable through the
hole on the back of the table adapter
TA7100 and block it with the cable
clamp supplied.
a
b
a
3) The arrows indicate the breaking points for the application of the
metallic frames (a) and for the video memory wires (b).
4) Screw the 4 metallic frames on the table adapters and hook the 2
plastic frames to them (see drawing 4 on page 159).
5) Screw the brackets WB7100 and WB700 on the table adapters.
a
6) Hook the monitor and intercom according to the instructions on
b
pages 157 and 158 (point 3 to 8) and the video memory according to
the instructions on page 160 (point 4 to 7).
When connecting the wires on the terminal boards of bracket WB7100
(point 6), mark the colour/terminal combination on the junction box.
a
161
(MT12 - Gb2004)
S
T
U
D
I
O
Advertisement
