Advertisement
PABX
REMOTE ACTIVATION OF AUXILIARY RELAYS USING A CODE
This service only works when calling over the public line with a
DTMF telephone.
It allows the user with password to activate from long distance the 4
actuator relays for auxiliary services (lights, thermostats, heating and air
conditioning installations, etc.) by making a call to the user's number.
Storing the passwords for external line 1 and 2
Chose a 4-digit password for line no. 1 and no.2 (i.e. 0190, 3233, 0010,
etc.) and write them in the table below.
Programming
Code
External line 1 password
3333-20
External line 2 password
3333-21
To program:
pick up the handset of the extension 41
- dialling tone
dial the access code 333320 to store password related to external line
no.1
dial a chosen 4-digit password (from 0000 to 9999). Always dial a 4-
digit number
wait for the acknowledgement tone and hang up.
Repeat the above procedure with a different access code and pass-
word for external line 2 (only FT208P).
Example: if the number below has been dialled from the extension 41:
3333200100the actuator boards installed in the PABX can be activated
by making a call to external line 1 and dialling password 0100.
SUMMARY TABLE OF OPERATIONS FOR THE ACTIVATION OF THE MAIN INTERCOM FUNCTIONS
Intercom functions
Door lock release during
conversation
Door lock release without
receiving a call
Intercom communication after
receiving a call
Intercom communication
without receiving a call
(1)
To have these functions you must programme the buttons of the ST740 telephone (see page 152).
(2)
Lift the handset and wait for the exchange tone.
Password to be stored
_ _ _ _
_ _ _ _ (only FT208P)
ST740 telephone
connected to:
(1) (2)
FT11D
FT105P
FT208P
+
+
+
+
169
(MT12 - Gb2004)
Operation
select the subscriber number to which the PABX is connected from an
external telephone
- Public Exchange call control tone
wait for the D.I.S.A. post-dialling tone
dial 7
dial the password programmed for the specific external line
dial the number of the relay to be activated
1 relay 1
2 relay 2
3 relay 3
4 relay 4
select the relay action (only for relays 2, 3 and 4. Relay 1 is always
activated for 3 seconds)
0 the relay is deactivated
1 the relay is activated
2 the relay is activated for 3 seconds
acknowledgement tone.
Examples: make the connection with the user's number and dial
7010032: relay 3 is activated for 3 seconds, being 0100 the password
related to external line 1 (see example above). To enable relay 1, dial 7
+ the password code + 1. Relay 1 can only be activated for about 3
seconds.
Note
In case of incorrect dialling, wrong password or no password within 5
seconds, the call is automatically sent to all extensions enabled to
receive external calls.
Standard telephone
connected to:
(2)
FT11D
FT105P
FT208P
R
R
R
1
+
+
(twice R)
R
R
R
R
6
+
+
+
+
+
(four times R)
R
R
+
+
+
(twice R)
Legenda
lift the handset
button of ST740W
telephone
button of ST740W
telephone
R
telephone numeri-
R
1
+
+
1
cal and functional
6
buttons
6
F
A
R
T
E
L
Advertisement
