Advertisement
INTERNAL STATIONS
Table version
1) Apply the 8 anti-slip rubber pads in their housings under the base of
the table adapters TA7100 and TA700.
2) Pass the connection cable through the
hole in the back of the table adapter
TA7100 and block it with the cable
clamp.
3) The arrow indicate the breaking points for the application of the
metallic frames (a) and the passage of the telephone cable (b).
4) Screw the 2 metallic frames to the table adapter TA7100 and hook
the plastic frame to them (c).
5) Screw the table adapter TA700 to the 2 metallic frames.
6) Screw brackets WB7100 and WB700 to the table adapters.
a a
7) Apply the monitor and telephone according to
the instructions on pages 157 and 158 (from
point 3 to 8).
b
When connecting the wires to the terminal
boards of bracket WB7100 (point 6) you must
mark the colour/terminal combination on the
junction box.
a
159
(MT12 - Gb2004)
c
S
T
U
D
I
O
Advertisement
