Fronius Selectiva 4.0 Operating Instructions Manual page 49

Only plug in the USB thumb drive when no charging process is taking place or the char-
ging process has been interrupted.
If the charging process has only been interrupted and not completely ended, it is only
possible to read data and not to perform an update or load a configuration.
Navigating in USB mode
Press the "Pause/Start" button to change to the settings listed below.
1
Use the "Up/Down" buttons to scroll between the settings.
2
Press the "Pause/Start" button to confirm the desired setting.
3
To start a data download, confirm this again with the "Pause/Start" button. If this re-
peated confirmation with the "Pause/Start" button is not carried out, the download starts
automatically after one minute.
While a charging process is in progress, the USB thumb drive may be connected after
pressing the "Pause/Start" button. It is only possible to read data and not to perform an
update or load a configuration.
Safely remove
- Safely remove the USB thumb drive once the desired action is complete.
Update
- A list of suitable update files stored on the USB thumb drive opens.
- The desired file is selected and confirmed in the same way as scrolling through the
settings.
- Do not rename the automatically assigned file name of the update file!
- The latest firmware is available in the
- Firmware installation instructions are included in the zip file of the download.
Download
- The data of the logged charging parameters stored in the data logger of the device
is saved for the I-SPoT VIEWER on the USB thumb drive.
- Events as well as device settings and user curves (configuration) are also saved.
- The following time ranges can be selected for the data logger:
1 month
3 months
All
Since last time
Download optional
The following options are available:
- I-SPoT VIEWER
The logged data is saved in the same way as for the "Download", but only with the
data for the I-SPoT VIEWER.
- Save data logger
The logged data is saved in the same way as for the "Download", but as "csv" files
rather than in the I-SPoT VIEWER format.
(Automatically created folder structure for the ".csv" files: *
Fronius\<Device serial number>\Charges\<yyyymmdd>\<hhmmss.csv>)
- Save events.
Events are saved on the USB thumb drive.
- Save configuration.
The device settings are saved on the USB thumb drive.
Load configuration
- Loads a suitable device configuration stored on the USB thumb drive into the device.
download area of the Fronius website.
49