Fronius Selectiva 4.0 Operating Instructions Manual page 34

1
Enter the configuration menu as follows:
1
1
2
3
4
34
Use the "Up/Down" buttons to call up the following information:
- Device serial number as well as serial number and version of the configuration
memory.
- PCB for control/power electronics: Hardware version and serial number.
- Software: Main software, secondary software, primary software and curve block
version.
Press the "Pause/Start" button.
Use the "Up/Down" buttons to enter the first digit of the code.
Press the "Menu" button to move to the next digit of the code.
Continue as described above until the complete code is entered.
Confirm the entry with the "Pause/Start" button.
First the screen appears in the basic set-
tings with display of date and time, as well
as the software version.
A prompt for the code appears.
Enter the required code "1511" as follows:
The selection of the main menu items for
configuration mode appears.