Table of Contents
Advertisement
Sleeping(MinTime)
0H
Wakes up and
Wakes up and
collects data
collects data
3.6V
REPORT 3.6V
Does not report
Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change
i.e. BatteryVoltageChange= 0.1V.
sleeping
th
0H
15
M
Wakes up and
Wakes up and
collects data
collects data
3.6V
REPORT 3.6V
Does not report
Notes:
(1) The device only wakes up and performs data sampling according to MinTime Interval. When it is
sleeping, it does not collect data.
(2) The data collected is compared with the last data reported. If the data change value is greater than
the ReportableChange value, the device reports according to MinTime interval.
If the data variation is not greater than the last data reported, the device reports according to
MaxTime interval.
(3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low,
the device wakes up frequently and the battery will be drained soon.
Whenever the device sends a report, no matter resulting from data variation, button pushed or
MaxTime interval, another cycle of MinTime/MaxTime calculation is started.
MaxTime
sleeping
th
th
15
M
30
Wakes up and
collects data
3.6V
Does not report
Wakes up and collects
data
3.5V |3.5-3.6|=0.1
REPORTS 3.5V
sleeping
th
30
M
sleeping
sleeping
th
M
45
M
Wakes up and
collects data
3.6V
Does not report
Users push the button,
Recalculate MaxTime.
th
45
M
Wakes up and
Wakes up and
collects data
collects data
3.5V
Does not report
Does not report
9
1H
Wakes up and
collects data
REPORT 3.6V
REPORTS 3.5V.
th
th
1H
1H 10
M
1H 25
Wakes up and
collects data
3.5V
3.5V
Does not report
2H
MaxTime
Wakes up and
collects data3.5V
Does not report
M
Advertisement
Table of Contents
